Leading Hardwood Flooring Refinishing Service and Cost in Albuquerque, NM
Best Albuquerque Handyman & Remodeling

When it comes to staining or covering your newly sanded floors make sure you vacuum everything extremely well and remove any excess dust using a tack cloth.  Once you’re sure your floor is dust free, start the staining from one end of the room and move uniformly across using brush strokes with the grain.  After that all you have to do is allow the top coat to dry as the manufacturer recommends!

If you start you refinishing project you may find out your floors are actually not able to be refinished.  If the boards are already too thin or you find significant water damage or buckling you may unfortunately have to replace your floors instead of refinishing them.

To obtain a free quote for hardwood flooring refinishing in Albuquerque, NM, please don’t hesitate to contact  at Best Albuquerque Handyman & Remodeling Floor Services.

This process involves a rough, medium, and fine sanding with our top of the line Hummel floor sanding machines. We then buff the entire floor and scrape all the corners so it can then be either stained or finished.  Best Albuquerque Handyman & Remodeling include water popping at no extra charge. We do this additional step to attain a deeper more consistent color to the floor. We then applicate the stain and 3 coats of water base finish with our premium plan. Most companies only stain and put 2 coats to save money. We offer an economy plan where you get the same craftsmanship and the only difference is we apply 3 coats of an oil base polyurethane as opposed to the 3 coats of water base polyurethane with the premium plan. You can choose a sheen level of matte, satin, semi gloss, or gloss at no additional charge. We have Dust free equipment that is up to par with the industry standard at no additional charge as well.

Hardwood Floor Refinishing

Quite simply,  Best Albuquerque Handyman & Remodeling are the hardwood floor refinishing experts in Albuquerque, NM. Again, this service represents a cost-effective way to bring a renewed beauty to your home.Even wood floors that most would consider to be beyond the point of feasible repair can be helped by our wood floor refinishing techniques. How so? We use a dustless floor sanding process which dramatically lowers the amount of dust in the air. This is an attractive feature for our customers who deal with dust allergies. You then choose your stain type, which is followed by three coats of wood floor finish.Best Albuquerque Handyman & Remodeling will recommend either a specific water or oil-based finish. With the appropriate care, which we will educate you about, you’ll be able to utilize the wood floor refinishing we’ve done to extend the beauty of your floor for many years to come.

How to Refinish Hardwood Floors

Hardwood floors are one of the greatest additions you can make to your home.  Sure laminate and linoleum can be cheap alternatives to save you a buck on installation day, but in the long run hardwood will help your home stay beautiful without going out style and without costly renovations.  Hardwoods have been used to cover floors since there have been floors to cover.  No matter how the trends change, hardwood has proven to be beautiful, popular and a great way to protect the value of your home. 

One of the greatest benefits of hardwood flooring is that you can refinish it multiple times. The benefit of refinishing your hardwood is that you get the look of brand new floors without have to do any removal or installation.  Most hardwood floors can be refinished between 5 and 10 times before the integrity of the board is compromised, or so much surface material has been removed that you need to install new boards.  In general, hardwood floors should be refinished about every 10 years but it depends on how much traffic they see and how often your furniture is moved.

Now let’s talk about how to refinish hardwood floors. In reality, it is as easy as sanding down your old floors and adding new polyurethane or stain to the exposed wood.  However, we’ve learned a few tricks that can really help make the job much easier.

First, make sure you prepare the area that will be refinished.  The sanding process is loud and extremely dust and the stain or top coat you put on will have some pretty intense fumes.  Because of all this, it’s a good idea to remove everything you can from the space, then seal off the area you will be refinishing.  Start by removing all the furniture, window coverings, wall hangings and any doors that the wood floor passes through.  Next cover any electrical sockets and attached lighting fixtures by taping plastic over them.  Lastly, make sure you’ve got good ventilation through a window and seal any door opening to make sure the dust doesn’t get to the rest of your house.

Now you’re ready to sand!  It can be tempting to try and use the small palm sander you have in the garage, but even if you have a small area to refinish it may still be worth renting a large drum sander.  Not only will this save you time, but a large sander will allow you to keep the floor much more even and flat giving you a professional look and a smooth floor.  Make sure you start in an area that is inconspicuous to get the feel of the sander and always keep it moving.  Sand with the grain of the wood and start with a relatively low grit sand paper like 20 or 60 grit.  Only remove as much material from the surface as you need to remove any imperfections or old top coatings.  Once you’ve got the imperfections removed you can step up the grit until you can use a 100 or 120 grit.  This will remove the scratches and leave the surface feeling and looking smooth.  Make sure you vacuum in between sanding with different grits to remove the dust as it can change the way sand paper cuts the surface.